Construction
Materials
CEMCON Product Range
CEMCON PLASTER
CEMCON Plaster is a cement-based ready mix plaster, to carry out traditional plastering works in a clean and speedy manner, while keeping a homogeneous mix. Due to its content in additives, it allows better workability and curing.
SCOPE OF USE
CEMCON Plaster is particularly recommended for application by spraying machine. These machines can be supplied by our company.
It may be applied on walls or ceilings on the following substrates:
- Concrete blocks, bricks, etc…
- Fair faced concrete
- Prefabricated concrete
- Traditional cement-based plaster
CEMCON RUSH COAT
CEMCON Rush Coat is a single component, polymer modified cement based plaster rush coat. It provides mechanical key for subsequent applications of the cementbased products like plasters. Its prime usage is to roughen the smooth concrete surfaces and ceilings prior to the application over coat system.
USES
Used as a dry pre-mixed mineral based bonding coat to apply on smooth concrete walls and ceilings. Used to provide a mechanical key for subsequent layers of cement and gypsum based plasters.
CEMCON WALL PUTTY
CEMCON DRY WALL PUTTY is White Cement based putty for cement plastered walls and ceiling. CEMCON WALL PUTTY is used to fill the uneven surfaces of cement plastered walls and concrete walls. Application of Wall Putty provides smooth and strong finish to the walls for further application of all kinds of paints. The smooth finish gives better look to interiors and exteriors.
USES
Used in exterior and interior walls of all sorts of buildings where an artistic or decorative coating is desired. Some of those are as follows:
- Houses
- Offices
- Shopping-Malls
- Bungalows
- Farmhouses
- Stadiums
- Trade & Technology Parks
- Educational Institutes
- Convention Centre
- Airport & Railway Stations
- Operas and Theatres
- Museums and Exhibition Halls
- Flyover Walls
CEMCON TILEFIX (100)
CEMCON TileFix (100) is a polymer modified cement-based adhesive used for permanent fixing of tiles. It is ready to use with addition of water.
USES
Substrate should be sound, clean and free from dirt, dust, laitance and all loosely adhering particles. Absorbent cementbased surfaces should be thoroughly saturated with water to achieve surface saturated dry condition.
CEMCON TILEFIX (150)
CEMCON TileFix (150) Tile Grout is formulated from portland cement, silica flour and other special proprietary ingredients. CEMCON TileFix 150 provides superior hardness, strength and durability with a wide variety of tiles.
USES
CEMCON Tilefix (150) may be used for grouting glazed wall tile, marble or granite. Use Tile Grout for grouting floors and walls whenever grout joint widths are less than 1/8".
BASF Product Range
Admixtures for Concrete
| MasterAir | Complete solutions for air entrained concrete |
| MasterCast | Solutions for the manufactured concrete product industry |
| MasterCell | Density reducing admixtures |
| MasterEase | Solutions for low viscosity concrete |
| MasterFiber | Comprehensive solutions for fiber reinforced concrete |
| MasterFinish | Solutions for formwork treatment |
| MasterGlenium | Hyperplasticizer formulated from state-of-the-art polymers for ultimate performance |
| MasterKure | Solutions for concrete curing |
| MasterLife | Solutions for enhanced durability |
| MasterMatrix | Advanced rheology control solutions |
| MasterPolyheed | High-performance superplasticizer |
| MasterPozzolith | Solutions for water-reduced concrete |
| MasterRheobuild | Superplasticizer for concrete |
| MasterSet | Solutions for set control |
| Master X-Seed | Advanced accelerator solutions for concrete |
| Green Sense Concrete Technology | Quantified solutions for sustainable concrete |
Cement Additives
| MasterCem | Solutions for cement manufacture |
Expansion Control Systems
| Watson Bowman Acme | Expansion control systems and bearings |
Performance Flooring Solutions
| MasterTop | Solutions for industrial and commercial floors |
| Ucrete | Flooring solutions for harsh environments |
Performance Grouts
| MasterFlow | Cementitious and resin grouts for general purpose and precision grouting and also for anchoring |
Repair and Protection Systems
| MasterBrace | Composite strengthening system to restore damaged concrete to its original load bearing capacity, and can increase its strength and structural performance |
| MasterEmaco | Primers, repair mortars and fairing coats to regain the structure's original strength and durability and also to protect against corrosion |
| MasterInject | Injection resins to fill and seal cracks and voids, re-establishing the structural integrity and protecting against further deterioration |
| MasterProtect | Water repellents, anti-carbonation and chemical resistant coating systems for protecting the concrete against the ingress of any contaminant |
Tiling Solutions
| MasterTile | Solutions for tiling systems |
Underground Construction Solutions
| MasterRoc | Solutions for underground construction |
Wall Systems
| Enershield | Air / Water resistive barriers |
| Senergy | Exterior Insulation Wall Systems |
Waterproofing Systems and Sealants
| MasterSeal | Solutions for waterproofing and sealing |
SIKA Product Range
Waterproofing
| Basement and Concrete Structures |
| Pools and Water Retaining Structures |
| Wet Rooms |
| Facades |
| Terraces & Balconies |
| Roofs |
Sealing
| Basements and Other Structures |
| Wet Rooms |
| Windows, Doors and Walls |
| Roofs, Terraces & Balconies, Facades |
| Specialities |
Bonding
| Structural Bonding | Sikadur SikaBond |
| Multipurpose Bonding | Sikaflex Sika Boom® SikaBond Sika MaxTack Sika ® MultiKit |
Anchoring and Grouting
| Chemical Anchoring | Sika AnchorFix |
| Grouting | Sikadur SikaGrout |
Repairing
| Concrete and Mortar |
| Walls and Facades |
| Roofs |
| Roads |
| Multipurpose |
Protecting and Cleaning
| Protecting | Sikagard |
| Cleaning | Sika Boom®-Cleaner Sikagard Sika® TopClean-T |
Admixtures and Essentials
| Admixtures |
| Essentials |
Flooring and Wall Finishing
| Cementitious Underlayment |
| Resin Floors |
| Wood Floors |
| Tiling |
| Wall Finishing |